32811W Kyosho – 1/27 RC EP MINI-Z MR-03W-MM With ASF 2.4GHz System – Lamborghini Murcirlago LP670-4 SV – White – Body/Chassis Set

Advanced design and performance combines with the ultimate in scale detail.

MR-03 chassis can be fitted with all MINI-Z bodies!

The difference of this machine will be noticed at the very first corner. Suspension stroke and camber change work in concert in the innovative front suspension to accurately trace the road surface while the adoption of a coreless motor in the newly designed digital steering servo has the model driving like its on rails with a light touch steering feel that brings the car back smoothly into line. In addition to the same low C of G from the MR-02, the narrow body styles of the MR-015 can be fitted due to the lightweight concentrated design. In fact, the MR-03 is compatible with all body styles from the MINI-Z racer series, which is perhaps the most comprehensive tribute to automotive excellence in R/C. Combine the MR-03 with your favorite car body and you have the finest radio controlled model available in style and performance. *Optional parts maybe required when fitting some bodies to some chassis types.

• Same battery layout as the MR-02 chassis achieves a low center of gravity with a main chassis width equal to the narrow MR-015. The main chassis is compatible with all MINI-Z Racer body styles. *Some parts maybe required separately.
• Equipped with 2.4GHz R/C unit specially designed for the MR-03. Requires no frequency bands. Simply switch power ON and enjoy safe and stable control.
• Digital steering servo features a coreless motor and a gear unit that has 3 times the gear reduction ratio of previous units for powerful movement and position retention.
• Can be set to either narrow or wide tread by replacing the front lower and upper plates and steering tie rod. Of course the wheelbase can still be adjusted to suit certain car types. *Change wheelbase requires optional parts.
• Optional gyro unit can be fitted for automatic correction of steering and throttle for even easier control. Layout design has space allocated so the gyro unit can be easily installed.

• Workmanship and detail that can be displayed alongside the most refined display models.
• Compatible with the full range of MINI-Z body styles. *Special motor case and differential gear assembly maybe required to fit some body styles.
• Features newly designed innovative ‘VCS’ front suspension that changes camber angle in response to suspension stroke.
• Equipped with digital servo with integrated coreless motor.
• Compatible with all body styles with matching motor case and Auto Scale Collection wheels and tires.
• Features ASF 2.4GHz System that requires no frequency bands. Single transmitter can be used with 2 or even 3 different models. *PERFEX KT-18 transmitter is sold separately.
• Coil springs on front suspension can be easily replaced by removing the spring stopper with just two screws.

Chassis type for each MR-03 set is displayed below. Refer to this table when fitting a MINI-Z Racer body.

Note: When Converting Front tread : When converting to narrow or wide tread, the appropriate type of front lower and upper plates as well as the steering tie rod are required. Rear tread : Install the special wheels included on the each body. Wheelbase : Adjust with the parts included on the body.

Body / Chassis Set Contents

• Semi-assembled chassis
• Completed body, finished with painting and affixed with decals & Front Body Mount(installed)
• MM specification power unit (installed)
• Lower and upper plate for wide tread (front), steering tie rod (installed)
• Front suspension spacer for adjustment
• 6T. 7T. 8T. 9T Pinion Gear
• Wheel wrench
• Pinion removing tools
• Pairing stick
• Spare wheel nut