34252 Kyosho – 1/8 Psycho Kruiser VE With KT-331P Transmitter R/S EP MT-4WD Readyset

The brutal power of this machine is meant for expert hands only!

• Top-level drivers proclaim this as the most extreme power in an R/C model
  ever experienced! This extraordinary monster truck features a 3-diff shaft
  drive full time 4WD chassis with a design running thick with the DNA of the
  multiple world-championship winning Inferno. The combination of 22.2V 6-cell
  LiPo battery and 1500Kv NEON 7 brushless motor produces a ferocious power
  to weight ratio that delivers explosive acceleration and top speeds of more
  than 80km/h. If you are not in full control of the throttle, it can back flip
  and leave onlookers completely lost for words. This formidable power is harnessed
  with a high-rigidity bulkhead, hardened chassis, reinforced transmission and
  diff ring gears, dial adjustable large capacity oil shocks and shock resistant
  battery case. This feature packed machine comes as a fully assembled Readyset
  package and requires no frequency band setting with the 2.4GHz Syncro KT-331P
  transmitter and ultra high-torque KS-203 steering servo system pre-installed.
  4-color printed body is included so you only need to add your own charged
  LiPo battery and batteries to the transmitter for the mayhem to start. We
  would like to say this model is for everyone, but such is the power of this
  machine only expert level drivers can have some degree of confidence in managing
  its extreme performance. There has never been a monster truck like this one,
  and maybe there never will be!

Features:

• 3 diff shaft drive full time 4WD chassis and 22.2V + brushless motor produce
  power like never before.
• Fully factory assembled Readyset.
• Pre-cut 4 color printed body.
• Pre-installed 1500Kv Team Orion NEON 7 brushless motor. (drip proof)
• 2.4GHz R/C system with Syncro KT-331P transmitter requires no frequency
  band control.
• Includes waterproof ultra high torque KS-203 steering servo.
• Incorporates many reinforced parts such as hardened main chassis.
• Features machined aluminum dial adjustable big bore shocks.
• Straight cut bevel gears made from special toughened steel and gear modules
  on the reinforced diff ring gear are designed to match the machine’s
  extreme level of power.Equipped with 6-spoke black chrome wheels &block
  tires. Balances rough road running power with high level grip performance.
• Stabilizers and universal joints are equipped on front and rear.
• Mud guard installed on rear axle provides protection from dirt and mud.
  Promises stable performance under various running conditions.
• Resin chassis stiffener as used on the Inferno NEO is installed on front
  and rear.
• Full bearing specification features 18 bearings through the drive system
  and wheels with 2 in the clutch bell.
• Large bumper provides protection for the front suspension holders and lower
  arm plate.
• Compatible with many optional parts for the Inferno series.

Specs:

• Length: 550mm
• Width: 427mm
• Height: 230mm
• Wheelbase: 355mm
• Tread (F/R): 289mm / 289mm
• Tire(F/R): 148 x 66mm / 148 x 66mm
• Gear Ratio: 12.375:1
• Weight: 4,650g (approx.)
• Motor: 1500Kv Team Orion Neon 7 brushless motor

Readyset Contents:

• Pre-assembled chassis with pre-set control linkages
• Factory assembled printed body
• 2.4GHz R/C system Syncro KT-331P pre-installed
• L-shape hex wrenches: 1.5, 2.0, 2.5, 3.0mm
• Cross wrench (large)
• 17mm wheel wrench

Required:

• Battery / LiPo 2-3cell x 2 pack (with Super (Deans) plug)/use series connected.
  Recommended: LiPo 4300 x 2
• LiPo compatible charger
• 4 x AA alkaline batteries for transmitter