- In S-FHSS mode, the 6J’s frame rate is just 6.8ms, a response speed unmatched
by any other 6-channel flight system. But the 6J isn’t just about speed; it’s
also one of the best values you’ll find anywhere. - It’s an easy and natural step up from a 4-channel system. And if you already
own a 6-channel, it’s a solid investment with a range of high-end features
that goes far beyond what you’d expect. Start with 15-model memory. Throttle
and pitch curves for airplanes as well as helis. Electronic swash ring for
helis, as well as four swashplate options. - And with the blazing speed, absolute affordability and unequaled value,
the 6J also offers the rock-solid security and dependability of Futaba FHSS
technology.
System features:
- 15-model memory
- 4-character model naming
- Simple 1-lever/3-button programming
- Data reset
- Airplane & heli software
- FHSS/S-FHSS modes
- Mode 1-4 selectable
- 127-segment, 40 x 40 LCD
- Digital trims/trim memory
- Endpoint adjustment (EPA), sub-trims & servo reversing
- Dual rates & exponential (ail/ele/rud)
- Fail-safe (all channels; in S-FHSS mode only)
- Throttle cut
- Trainer system (cord required)
- Throttle position, mix & low battery warnings
- Up/down & model timer
- Range check mode
- R2006G Receiver
Airplane Features:
- 2 programmable mixes, plus:
(2) 5-point throttle curves
(2) 5-point pitch curves
Flaperon w/differential rate
Flap trim (2 rates)
V-tail mixing
Elevon mixing
Heli Features:
- 15-model memory
- 4-character model naming
- Simple 1-lever/3-button programming
- Data reset
- Airplane & heli software
Requirements::
- 4 x AA cells
- Servos (FUTK6000 only)
Transmitter Specifications:
- Type: 2-stick, 6-channel, FHSS/S-FHSS selectable
- Current Drain: 170mA
Receiver Specifications:
- R2006G 6-Channel Receiver
- Type: Full-range flight receiver
- Modes: FHSS or S-FHSS
- Features: Easy-Linkβ’ binding, high-voltage operation,
frequency-hopping, spread-spectrum design & Dual Antenna Diversity - Voltage Input: 4.8V-7.4V
- Compatible Batteries: NiCd, NiMH, LiPo, LiIon & LiFe
- Dimensions: 1-11/16 x 15/16 x 516 in (43 x 24 x 7.9 mm)
- Weight: 0.29 oz (8.3 g)
- Current Drain: 80mA (@ no signal)





Reviews
There are no reviews yet.