84263 Tamiya – 1/10 RC Tyrrell P34 Six Wheeler 1977 Monaco GP F103 Chassis [Limited Item]

• The Tyrrell P34, the only 6-wheeled F1 race car ever
  to compete in the history of F1, caused a lot of fanfare and controversy when
  it was introduced in 1976. This is a 1/10 R/C assembly kit model of the Tyrrell
  P34 which raced at the 1977 Monaco GP, which had a different rear wing and
  engine cover than the car which raced at the Japanese GP.
• The high performance direct drive 2WD chassis has a semi-double
  deck layout with 1.5mm thick upper and 2.5mm thick lower FRP plates. The kingpin
  and coil spring 4-wheel independent front suspension consists of a one-piece
  lower arm and left/right upper arms. One servo controls the steering of all
  four front wheels. The rear suspension features a rigid T-bar suspension with
  a coil spring and friction plate. The spur gear has a built-in ball diff that
  provides a limited slip effect. In addition, both front and rear wheels are
  equipped with high-grip sponge tires.

Specs & Features:

• 1/10 scale R/C assembly kit.
• P34 Tyrell body is made out durable polycarbonate material.
• Stickers are included to depict team drivers Jody Scheckter&39;s
  No.3 and Patrick Depailler&39;s No.4 cars.
• High performance direct drive 2WD chassis comes equipped
  with a half double deck frame with 1.5mm thick upper and
• 2.5mm thick lower FRP plates.
• Kingpin coil spring front suspension.
• Links control the front 4-wheel independent suspension.
• One servo controls all four front wheels.
• The rear suspension features a rigid T-bar suspension
  with a coil spring and friction plate.
• Front and rear foam tires included.
• 540-J brushed motor included
• Length: 430mm
• Width: 204mm
• Height: 108mm
• Weight: 815g
• Tread: 140mm (Front), 155mm (Rear)
• Tire Width/Diameter: 23/44mm (Front), 45/64mm (Rear)
• Gear Ratio: 4.5:1 (when used with 14T pinion and 63T
  spur gears)
• Requires an Electronic Speed Controller (sold separately)