GY611_S9256 Futaba – GY611 Gyro + S9256 Servo

This is the Futaba GY611 Gyro with the S9256 Digital Servo.

FEATURES:
Super narrow pulse drive system substantially improves servo response

Microcomputer high-speed arithmetic processing substantially improves gyro
response

High-resolution 12-bit A/D (Analog to Digital) accurately converts sensor output
to a Digital Signal

SMM (Silicon Micro Machining) micro-machining mechanical parts and systems right
on a silicon chip and also low-back aeroform case improves vibration resistance
and neutral characteristic

AVCS (Angular Vector Control System) (same as Heading Hold) system requires a
high-precision angular velocity detection function and extremely small output
drift by using a new type of gyro sensor.

This minimizes rudder neutral position drift during flight and eliminates the
need to trim the rudder during flight.

Futaba S9256 (FUTM0226) Digital Servo is fully compatible with super narrow
pulse drive and features high response (.06 sec/60�X) and Alumite case with heat
sink to cool the motor

INCLUDES:
Futaba GY611 sensor, control amp, S9256 servo, mini screwdriver, 3 sections
double sided tape and instruction sheet

REQUIRES:
4.8V Rx battery ONLY (higher voltage could damage the servo)
Assembly and adjustment onto the helicopter

SPECS:
GY611 Ratings: Yaw-axis stabilizer for helicopter (rate gyro)
Display Device: 8-character dot matrix Liquid Crystal Display
Operating Voltage Range: DC 3.8V to 5V
Current Drain: 70mA @ 5V, including sensor
Dimensions: Amp 2.2″x 1.2″x .59″ (57 x 32 x 15mm)
Sensor 1.2″x 1.2″x .71″ (30 x 30 x 18mm)
Weight: Amp 1.19oz (34g) / Sensor 1.05oz (30g)

S9256 Servo
Dimensions: 1.6″x .79″x 1.4″ (40 x 20 x 36.6mm)
Weight: 2.01oz (57g)
Speed: .06 sec/60�X (at 4.8V)
Torque: 47 oz-in (3.4 kg-cm) (at 4.8V)