FEATURES:
- This servo is designed especially for the GY601 and the GY611 gyros; it
will not work with any other application. - The manufacturer claims that the S9251 is the only servo that can be used
with the GY601 gyro because no other servo has a sufficient frame refresh
rate. - The GY601 can only be used at 4.8 volts; higher voltages may damage the
gyro. - Manufacturer Warning: “When mounting this servo in the fuselage, ensure
that the servo case and the metal parts of the helicopter frame do not touch,
to prevent radio noise.” - Manufacturer Warning: “Immediately after flight, do not touch the S9251
case. The heat sink section of the case may be extremely hot, and may cause
burns.”
SPECS:
- Modulation: Digital
- Torque: 4.8V: 51.0 oz-in (3.67 kg-cm)
- Speed: 4.8V: 0.07 sec/60°
- Weight: 2.01 oz (57.0 g)
- Dimensions: Length:1.57 in (39.9 mm)
- Width:0.79 in (20.1 mm)
- Height:1.46 in (37.1 mm)
- Motor Type: Coreless
- Gear Type: Metal
- Rotation/Support: Dual Bearings






Reviews
There are no reviews yet.